Powermaster Industrial Supplies - Spring Balancers

1262 Baker Road, Casselman, Ontario, Canada K0A 1M0

Tel: (613) 764-0572  Fax: (613) 764-3719

sales@powermasterindustrialsupplies.com

Home   |   SWF Series Balancers   |   SWA Series Balancers   |   SBH Series Balancers   |   Beam Trolleys   |   Site Map   |   Industry Links   |   Contact Us

Spring Balancer Links

SWF Series Spring Balancers

SWA Series Spring Balancers

SBH Series Spring Balancers

Beam Trolleys for Balancers

Other Tooling Links
Heat Transfer Industry

Tube Tools

Condenser Tube Expanders

Boiler Tube Expanders

Tube Removal Tools

Tube Installation Tools

Tube Rolling Controls

Tube Cleaning Equipment

Bolting Technologies

Industrial Impact Sockets

Castellated Sockets for Turbines

Slugging Wrenches

Structural Wrenches

Hydraulic Torque Wrenches

Mechanical Torque Wrenches

 

Global Mine Info

 

Spring Tool Balancers for safety of operators and machinery

Powermaster Spring Balancers are the only Spring Balancer which has a certified Safety Compliance Certificate.

This means, NO OTHER BALANCER IS SAFETY CERTIFIED.

Spring Balancers are used in industry for the balancing of tools and equipment for the safety of operators and machinery. It has been proven that operators of heavy tooling can work more efficiently when a spring balancer is used as a tool balancer. This also is more safety conscious as tooling and power cords are kept out of the work area. When an operator is less fatigued he or she is working at their optimum performance.

Powermaster Industrial Supplies has specialized in zero gravity balancers for over 10 years and our trained staff can advise you on the correct selection of spring balancers to the task in hand.

Safety of our product compared to the Competition

 SBH Spring Balancers for heavy duty loads up to 300 kilograms.

Safe

Unsafe

Powermaster's safe balancer which is fully enclosed to stop the chance of fingers being caught in the mechanism and the ingress of dust and debris.

Unsafe balancers with the drum exposed means the chance of fingers getting caught and the ingress of debris and dust causing mechanical failure.

Powermaster spring balancers are fully enclosed to stop personnel getting fingers or clothing trapped in the balancer and then getting pulled into the pulley housing. With the spring balancer being totally closed this also helps stop dust and debris getting into the mechanism.

With our competitors spring balancers the side is open and is an easy accident waiting to happen. This type of balancer, sometimes known as a spring retractors, lends itself to more frequent maintenance strip downs.

Quality of Tooling

Our quality of product is of the utmost importance and we carry out full continuity checks before we dispatch any product. All of our products are manufactured under ISO9001/9002 conditions and we are also certified under the European CE certification.

Reliability

We test our units for weeks in a continuous cycle where the unit is operated to its maximum travel and it is monitored for any problems or failure. This is why we stand by our saying of "Built to Last".

Updated Design of Product

The Powermaster Spring Balancer has been designed to be the most user friendly design making it easy to service and use.
Wire Rope -The Wire Rope housing allows the wire rope to be changed without dismantling the unit. Therefore the unit is back in serive in the quickest possible time.
Spring Assembly - All other spring balancers have always been very dangerous and difficult to change the spring assembly. Now with the Powermaster Spring Balancers, the spring assembly is supplied in a concealed unit for easy replacement.

Pricing
Call: (613) 764-0572

Powermaster Spring Balancers are consistently the lowest available for the same quality of balancer. We never compromise the outstanding quality and consistency of the tooling. Where volume numbers are required further reduction of pricing will be passed on to the customer.